Aluminun transmission top

[willywonka2]

Lookin to locate a aluminum transmission top fo a farmall 560. Any one got any ideas?

 

[Anonymous-0]

Because of the shifter mounting, we sawed ours in half and then milled the edge square. Then we fabbed an aluminum "box" for the back half. A little blue goo and it works fine. I am sure a billet cover could be made... Probably looking at $400-$500 for material alone.

 

[Anonymous-0]

look at some llss pulling in orva there are 2 or 3 with aluminun tops and the shifters

 

[puller1]

Camm Machine & Welding 812-347-2040 makes a very nice piece just bolt on your shifter & rails can be easily polished if you want.It will weigh less than 30 lbs.