Anonymous-0
Well-known Member
I noticed in your 560 photo you have a bracket built to slide your wheel weights on and off. Can you possibly post a little better picture of that? I would like to build a similar arrangement.
oldihpuller
New User
Bornred I'll try to post a couple pictures of my rear wheel weight brackets. My son designed and built this set about 25 years ago and they work fine. They are very light weight but yet very strong because of the light weight 5" channel
iron and the cross bracket that fits the axle snugly. This set pictured has a plate bolted in the cross bracket to fit 460,560 etc. With the plate removed they fit the o6 and others. This set will hold 7 or 8 ring weights on each side.
It's easy to slide weights off the trailer onto these brackets or off the brackets and on to the fork lift for storage.
Although my origional pic shows the belly bar
loaded, I don't pull this way. I preffer most of the weight on the wheels with just enough on front to keep front down....oldihpuller
iron and the cross bracket that fits the axle snugly. This set pictured has a plate bolted in the cross bracket to fit 460,560 etc. With the plate removed they fit the o6 and others. This set will hold 7 or 8 ring weights on each side.
It's easy to slide weights off the trailer onto these brackets or off the brackets and on to the fork lift for storage.
Although my origional pic shows the belly bar
loaded, I don't pull this way. I preffer most of the weight on the wheels with just enough on front to keep front down....oldihpuller
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy