B-61 mack HELP

I like an idot let my b-61 run out of fuel.I need to know how to prime the engine and the fuel filter to get it to crank.What do I need to bleed out and where do I start.PLEASE HELP. THANKS STEVE.
 
first fill the fuel filter up do you have a hand pump on the motor if you dont there are a few ways of doing it you could put a eleck fuel pump in line to get it prime or take your return line off and put air to the tank lose up the maine lin at your pup tell you get fuel after that you might have to open injetor line to get you pump to blead out but you will have to crank you engine over
 
All B model Macks have hand priming pumps . Assuming you have an inline six cylinder Mack engine, the pump would be on the radiator end of an inline injection pump, or at the firewall end of a rotary pump.Unscrew the nut that holds the bail down on the pump handle, move it aside, and lift the pump handle up and down until you can feel the resistance of the fuel being moved through the system (this may take a hundred strokes). Then lock the plunger back down, and start the engine
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top