B Farmall

[Deryl Sewell]

Anybody have an extra drain plug for the oil pan on a B farmall? C113 engine. Also still looking for a single plow drag type breaking plow.

 

[old]

If I remember right that plug is a simple pipe plug but I know I have at least 2 oil pans out in the shop with those plugs. E-mail is open

 

[Anonymous-0]

Deryl, I have a single oliver trip plow on steel for sale. It is in Tyler, Tx., however, may be able to work something out. Thanks,Ed

 

[Deryl Sewell]

Ed,
I'm about two hours from Tyler. Actually I used to live in Henderson. How much for the plow?

 

[Deryl Sewell]

If it's a simple pipe plug, I'm headed to Home Depot. lol
Thanks for the info.
Deryl

 

[Deryl Sewell]

OK. We got her running. We adjusted the valves, cleaned the carburetor and after 30 minutes of pulling it through the neighborhood, she finally kicked off. We have a spit back through the carburetor about every ten seconds or so. We ran it for about 45 minutes, thinking that maybe it would clear up but not yet. It will start on the third turn of the handcrank, so I think timing is not the issue. I"m leaning towards maybe a pitted intake valve on the cylinder that was stuck?? Any suggestions?