Bought the MEG-MO BLADES

[lenray]

Installed the new blades on our zero turn CC TANK.
They do a beautiful job and really cut the grass into very fine pieces.
Instead of the single blade it is replaced with a round cylinder with four swinging blades.
I am not a dealer---

 

[Anonymous-0]

Where are you located, and do the mega-mo's work in wet grass. I ask merely for information, not any animus.

 

[lenray]

Michigan----I also wonder about wet grass--that will be a test. In the spring when the grass is lush and green will tell if they are better than original equipment.

 

[Anonymous-0]

Do post, again, next spring, let us know what you think about them, with some experience.

 

[WAYNE-N-TX]

I've fell this same trick before. DEALER

 

[MarkB_MI]

Wayne, lenray has 816 posts. I'd say he's legit.

 

[lenray]

I have a 42 9N my dad bought new and it has never spent a night outside of a building also a 3010,4010, 410 BH, 756 IHC and 2 H60D Houghs--I would tell others these are decent tractors to own.
I found the mower blades advertised in FARM SHOW MAGAZINE--I called to order and got the owner of the Co.--he was driving his car down the road and took my order right there. Blades arrived 4 days later.

 

[WAYNE-N-TX]

Didn't mean to ruffle feathers. How do you find this info. out?

 

[lenray]

well Wayner ya kinda riled me, but I am over it.
There is a magazine called FARM SHOW--That is where I first saw them. Also googleD MEG-MO.

LOOKS LIKE A ONE MAN SHOW out of Illinois.

My wife loves to mow and she really likes these new blades. I doubt if there is a blade that will do well in heavy wet grass---it will ball up.
Here in Michigan in the spring we get LOTS OF RAIN AND THE NEW GRASS IS VERY HEAVY.

FROM WHAT we have seen so far I think they will do well in the spring.

 

[MarkB_MI]

Go to modern view and click on the poster's name.

 

[WAYNE-N-TX]

OK, I'll start doing that before I jump the gun.
Thanks

 

[Anonymous-0]

Meg-mo has a web site that would answer a lot of these guys questions.I think Iam going to try a set on one of my mowers and see how they perform. The replacement blades are cheaper than orginal replacement blades.

 

[Ozlander]

(quoted from post at 20:36:21 07/30/12) Meg-mo has a web site that would answer a lot of these guys questions.I think Iam going to try a set on one of my mowers and see how they perform. The replacement blades are cheaper than orginal replacement blades.

Except you need 4 instead of 1. 20 bucks plus shipping to replace a $15 blade from TSC.

 

[Anonymous-0]

I have three garden tractors with 50" decks and a set of(3) good blades not cheap junk blades are around $75.00- $80.00 for a set of 3 blades. I get poor service from TSC blades.

 

[Wayne inTx]

Where in Texas?