grandpa Love

Well-known Member
Fixed it in the field. Tedder head had 3 broken bolts and last one bent.That head was about to fall off. Could only get one broken end out, and didn't have a bolt in my truck. Used a lynch pin in one hole And vice grips. Wife got back from gas station and we found a bolt in her truck tool box. Got the hay done. Tedder- rake is home and going in shop......
cvphoto58446.jpg


cvphoto58447.jpg

Lucky we ran a string around the vice grips! They fell off a couple times.
 
Great fix.
I put a pair of vise grips on an old plot thrasher at Clemson in the early 80's to keep a large pin from moving.
They were still on there when I retired.
Richard
 
This is the head we swapped out off the parts machine. Don't know if we over tightened the bolts or if they worked loose . I guess either way would cause failure. Got 2 broke bolts we have to get out...... Always something ain't it?
 
Might want to use some of the nylon lock nuts on high vibration equipment.

Tedders are handy, but always needing fixed.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top