Bronze Metallic vs. Dyna Brown vs. ???

Looking for advice on the MM brown colors.

I've got a '59 4 Star that will need the chassis/drive-train repainted in the near future. Somebody repainted it in the past with a non-original metallic flake dark brown. I like this non-standard color but cannot (so far) find a match for it. It is darker than the original bronze metallic.

We have just repainted the bodywork in the original PG3 color. For the drive-train I'd like to preserve a reasonably original look but I'm not too keen on the original Bronze Metallic. I'd like something a bit darker.

Is the Dyna Brown darker than the Bronze Metallic?

Can somebody suggest an alternative metallic brown that is darker than the Bronze Metallic but still looks reasonably original & looks good with the Prairie Gold 3 Bodywork?

I'd like something that I can get in rattle cans as well as for a sprayer. I have a few spray cans of the original Bronze Metallic from Tractorcolor.com & as I said it is too light for my taste.

In the photo below we will also be repainting brown that front chassis piece that ties together the front axle, engine, & radiator.

Thanks.

Dan
3185.jpg
 
Dan, Go to the store where you get your PPG at and ask them if they have any of the old sample color ships to look at. Our older NAPA store still have the books and the codes are still good. Any way I look at a couple of colors for my jetstar before I went back to original as I was having a time getting it. Look at the 60's models Chrysler's and 80's model Freightliner's and peterbilt's. I bet you will find something to your liking there. My email is open if you need more info.
 
1974 Chrysler Imperial metallic brown is great. I thought the new Dyna was more of a Chocolate Milk brown.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top