Bullet Racing Cams

[Anonymous-0]

Has anyone used these cams and had any luck with them? Im building an 800 cubic inch JD G

 

[farmerwd45]

yes have one in my wd45 works great.

 

[CGpuller]

I have one in a Farmall H and like it.

 

[clif bice]

Bullet cams by Sonny are very good! I send many cams to him and have had excellent results. Also he pulls tractors, good turn around.
#662-893-5670
Clif

 

[Red Tractor]

Got one in my 44 Works great

 

[Josh Blackburn]

I have not ran one, but recall someone teling me that they were not happy with the cam in there deere built by them.

 

[Anonymous-0]

had one built for my open class 230 farmall and loved it. great guy to work with. sonny

 

[north puller]

Can't say for sure, but it sounds like Sonny is a red man. Good feedback from Deere people regarding Dengler cams or Tripple G cams. Dengler is expensive. Tripple G is priced good and very quick turn around. 1-888-720-0830. Ask for Bob.

 

[Anonymous-0]

Been running them over 10 years and are great.Sonny is very helpful and has time for everyone on a personal level.

 

[Anonymous-0]

So do you think bullet cams are more for other tractors besides two-cylinders?

 

[Anonymous-0]

Don't go to Tripple G. He sends everything out and doesn't put any time into the parts. Unless you want to waist money then go for it..

 

[PaulD]

Run a bullet cam in our case 930 and 411b, and farmall 706. All of them are great cams!

 

[2-banger]

as far as i know bob does all his own work. and like north puller said he can have cams and carbs done in 2 weeks.

 

[JD DUDE]

put a bullet in my moline u a few years back....from lunati to bullet...night and day bullet is the place to go...and if u hear from a guy that says otherwise its probly because he doesnt know how to time a came...there are a lot of junk cam grinds out there but alot of times the cam is just being installed by a dummy! bullet is the best kept secret in my garage i have several