Anonymous-0
Well-known Member
I have an old burr mill that I would like to use to grind feed for my chickens.
But I would like to find some info on the speed it should turn and basic settings of the discs.
The unit is cast metal made by:
Northern Minn Machine & Foundry Works
Hallock Minnesota
No.9
The hopper has Buffalo on it.
The unit overall length is three feet, height is two feet and hopper width is two feet.
It was belt driven, with the belt pulley mounted under the hopper area. The pulley is seven inches long by five inches deep.
Any help would be appreciated.Thanks in advance.
But I would like to find some info on the speed it should turn and basic settings of the discs.
The unit is cast metal made by:
Northern Minn Machine & Foundry Works
Hallock Minnesota
No.9
The hopper has Buffalo on it.
The unit overall length is three feet, height is two feet and hopper width is two feet.
It was belt driven, with the belt pulley mounted under the hopper area. The pulley is seven inches long by five inches deep.
Any help would be appreciated.Thanks in advance.