calling all TE20 owners

[Anonymous-0]

hello,where does the breather pipe come down to off your valve cover?mine comes down right to the wire going into the coil,the wire off distributor,maybe a couple inches above it,blowing the little bit of smoke onto the wire,and on my to30 the pipe is longer and is more forward towards the dipstick,i was just wondering if i had the correct valve cover on the te20 or if it could have come off something else.thanks

 

[gerard]

That"s right - specially designed to keep moisture off the coil!

 

[Berryville]

(quoted from post at 00:19:07 10/31/07) hello,where does the breather pipe come down to off your valve cover?mine comes down right to the wire going into the coil,the wire off distributor,maybe a couple inches above it,blowing the little bit of smoke onto the wire,and on my to30 the pipe is longer and is more forward towards the dipstick,i was just wondering if i had the correct valve cover on the te20 or if it could have come off something else.thanks

On my TE20 that breather pipe goes down past the coil....

Pete

 

[Jeff-oh]

I can't help Mine has been replaced with PVC

sorry

 

[Hills of TN]

Yep, same here. It breathes right down on the end coil connection wire to the distributor.

 

[Horseturd]

Mine came with an addition to the tube. A previous owner had added a piece of automotive heater hose to the tube, held on with a hose clamp.