case 2470 problem help needed

DAN930

New User
Help please
our 2470 started this morning & runs fine until while moving forward a clunking noise started from around bell housing area .
now a noise happens when the clutch is in, when its out no noise just a light clunking sound .... it will shift through all gears no problem... before we split the tractor apart to look would any one have any thoughts... son was working the tractor yesterday with no problems at all
thanks guys
 
Hi again
would anyone know if this unit would have a throw out bearing...?
We run 3 case 930's.. our new 2470 is like a space craft!!!
 
The bigger ones 26 2870 4890 etc do not have a clutch,just a big [huge] belleville spring on the flywheel. It acts as the disconect when you push dowm the clutch pedal and as a cushion for shock loads. Those tractors are pretty straight forward to work on but beware the parts are big and heavy, you need industrial strength stuff to work on the old dinosaurs. They are rugged and long lasting if you take time to grease the 100+ fittings. Used parts are available and a complete tractor for parts will be less than you think.
 
in the bell housing is a torque limiter, it has nothing to do with applying the clutch, it is simply a safety that will slip if a problem occurs, c-2 clutch pack in the ps is the clutch. the single disk t.l's in the 20-2290 gave some trouble with the center tearing out of the disk, the 2 disk ones in the 13,1570 ect. usually didn't give alot of trouble, not to say they were bullet proof.
 
Thanks a bunch for the info... so you think that this could be the problem...?
I been to our local case shop today they gave me a real long story... if we are going to put the tractor right we will do it our selfs
thanks anyway & if you have any more thoughts please send them on

dan
 
Agree with Dboll . If you have the ability to split at bell housing you will be able to see torque limiter an also first clutch that might have center damaged. DBOLL AN OTHERS CAN TELLYOU MORE BUT I BELIEVE YOU CAN REPLACE THAT CLUTCH AN ALSO TORQUE LIMITER WITHOUT GOING INTO P SHIFT ANYMORE.aLSO IF IT REQUIRES MORE WORK YOU WOULD HAVE TO SPLIT ANYWAY. You should go to cnh website an under parts an you will seewhat it looks like in there.On behalf of case dealer wanting to do whole job we got to remember they stake there reputation on doing it correct an as result it costs a bunch.
 
Thanks for info
I understand what case is saying....
Would like to find a manual next , every unit we buy seems to need work of some kind, guess thats what you get with older tractors... The feeling is good once you get them running like a new one though. have you guys had a problem like this?
Any further help or info would be great if anything comes to mind

Thanks
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top