Case fenders

[mdhammer]

Just wanted to verify that the fenders in photo belong to Case VAI and not a DI or DC. Or maybe they aren't Case fenders at all. Thanks in advance!

 

[mdhammer]

sorry upload didn't work earlier

 

[VACLee]

Definately VA series. Can't tell for sure on VAI since can not see bottom edge. On VAI/VAH models the mounting flange is flush with the sheet metal. On the early VAC and other models the mounting flange drops down about 2" below the sheet metal. On the later models the flange drops about 4". VAI/VAH was the same through out the series. Lee

 

[mdhammer]

If anyone is involved in a restoration project and NEEDS a pair like these let me know.

 

[Anonymous-0]

If those are off of a Va, How much are you asking? Also do you have any other VA parts (1953 model)?

 

[mdhammer]

Well, since Casenutty is going to donate some fenders to my project I can"t hardly charge you for these fenders - paying it forward. I would however ask if you would donate something to my project? Suggest a gallon of primer or maybe some inner tubes. Thanks.

I am in MN and no I don"t have any other VAI parts.