Case LA Water Pump

[Chris0169]

I am in search of a water pump for a case la. I should have done more research before trying to remove it and broke the flange. I ran the bolts into the threaded holes and started slowly tightening them alternating between the 2. I did not realize the water pump actually fits inside the block. I noticed silicone on the flange and thought it was stuck I tried to pry on it and it broke like it was brittle or maybe i cracked it when tightening the pusher bolts. It is soaking in PB now for the past week but have been unable to locate a pump. I am located south of Waco in Texas if anyone has a lead i appreciate it.

 

[Richard G.]

Is this what you need?

 

[Chris0169]

(quoted from post at 18:22:42 02/14/23) Is this what you need?
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto147504.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto147505.jpg>

It looks similar I still have not got mine off.

 

[Richard G.]

I used to rebuild these pumps may years ago.
I remembered that I had one casting and maybe some parts.
I found this casting and sent you the photo last night.
Let me know when you get the casting off.
I believe I use to take the water pipe casting off the front of the block and spray penetrating oil up in the block around the back of the water pump to help it release.
I will look and see if I can find any more parts.
You can send me an email message if you like.
Richard in NW SC