Case-o-matic

[J. R. McVay, Sr.]

I have 2 case-o-matics I have to pull out. I was wondering if someone on here has the bracket to pull them. If so I would like to have a picture and measurements so I can build one of my own.

 

[Case Nutty 1660]

Jim sorry I don't seem to have the measurements to build one for the 13" converter this pic is the best I can do cnt

 

[ron57]

what r u going to do with them fix them or sell them i need i 4 my tractor please let me no

 

[Don L.]

I just pick up one of those jigs. I will borrow it out anytime.
Don L.

 

[J. R. McVay, Sr.]

I want to thank everybody for their response. I have contacted Don L. I do not want to sell any of those Case-o-matics. One I have to take out to work on the transmission and the other I am just going to take out and check.

 

[Anonymous-0]

hi ron , just sent my # on earlir post about your problem with 800 ,,, i have a GOOD torque converter for 800 or 730-830, they all are the same ,, i would bet that there is nuthin wrong with your tranny ,, so call me and i will walk you thru all the quirx ,, jim