CAV pump leak update

[JBMac]

Just wanted to thank TomTex and everyone else who helped me out. It was a piece of cake repair and only cost $8.00 in parts. I could see where you could screw up pretty bad if you dropped something down in the pump with the cover off.

 

[Anonymous-0]

Interesting. I looked at the posting you referred to and wondered if it pertained also to Minimec and Simm's?

 

[JBMac]

Not familiar with those brands. This CAV pump looks identical to the ones on my Massey 135 I sold and the two 175's I currently own. It's a delicate, but simple repair I wish I had done years ago on the Massey's. God knows how many $ of diesel dripped out of those over the years. Just two little o-rings and a gasket!

 

[Anonymous-0]

Glad the long write-up helped you out. So many folks have ruined their tractor by not getting the spring hooked back exactly right. Like you say, it is a quite simple repair, right on the tractor, replace 4 O-rings (2 on each shaft), and the gasket. Tom

 

[Anonymous-0]

Tom one other thing that helps me a lot if i take some new unknown apart, I use a digital camera and take pictures as i go...



MAY GOD BLESS THE USA