jon f mn
Well-known Member
Spent the weekend combining my oats and
barley and baling straw. Combining went
well with the only problem being a loose
wire on the ignition gave some trouble.
Crops were not great, averaged a out 50
bu/acre.
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135040.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135042.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135043.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135044.jpg>
Baling went well til the last load, the shear pin or the needles broke which caused one needle to get broke. So I had to weld that and missed a few bales til I got it adjusted right. But otherwise things went well. Got just about 600 bales in the barn.
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135045.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135046.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135047.jpg>
Next project will be chopping corn if I decide to do that, some of my corn got stunted from wet earlier this year and I may chop that rather than combine it.
Here is a short video of baling.
Baling
Had some help, Abe came along for the ride.
This post was edited by jon f mn on 09/06/2022 at 05:55 am.
barley and baling straw. Combining went
well with the only problem being a loose
wire on the ignition gave some trouble.
Crops were not great, averaged a out 50
bu/acre.
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135040.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135042.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135043.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135044.jpg>
Baling went well til the last load, the shear pin or the needles broke which caused one needle to get broke. So I had to weld that and missed a few bales til I got it adjusted right. But otherwise things went well. Got just about 600 bales in the barn.
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135045.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135046.jpg>
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto135047.jpg>
Next project will be chopping corn if I decide to do that, some of my corn got stunted from wet earlier this year and I may chop that rather than combine it.
Here is a short video of baling.
Baling
Had some help, Abe came along for the ride.
This post was edited by jon f mn on 09/06/2022 at 05:55 am.