connor9988

[ironeaglefarm]

Here is a plow I started and need to finish. I think it works well, it could use cover boards and some adjustment.

 

[kenbob]

Is your tractor a 430?

 

[kenbob]

You actually have it in the ground. Some of those plowing day videos they aren't in very deep.

 

[ironeaglefarm]

570 gas

 

[Part Time Pete]

I've never seen a two bottom semi-mount plow - neat

 

[connor9988]

Thank you for posting those photos! That is EXACTLY what I was envisioning!
Well, I think I found my next project... Now I need to track down an old JTA plow. It would be nice if there was an old parts unit or beat up JTA sitting in a fencerow around here.

Do you have pictures of the steering mast? I am curious how you got around the offset hitch and the Cat 2 drawbar.

Also, I envisioned having to move the steering pivot arm on the backbone all the way out to the end of #1 bottom to keep things in line but it looks like you moved it a set of holes to the left.

 

[connor9988]

Crude drawing:

 

[chuck machinist]

Great showing there!CM

 

[ironeaglefarm]

I will take some more pictures when I get a chance. It has been 4 or 5 years since I reworked it so my memory is foggy. I think there is a bottom plate where the the cat. 1, cat. 2 bar mounts, and I maybe cut it loose and re-welded after I bolted the thinner bar. I will check that as well. I need to put together a video from the plow day. I have drone footage and lots of pics.