craftsman riding mowers

Anonymous-0

Well-known Member
Hi folks,
anyone know where the new craftsmen riding mowers are made (china?)?
I read somewhere that sears stuff was now made in China.

Thanks, Dave
 
apparently the parts are made in china, partialy assembled, and the store finishes assembly when they get them, i bought a new craftsman last year, its typical cheap chinese junk, the mowerdeck wont stay leveled because the mounting hardware bends frequently , it also leaves a strip of grass in the middle where to 2 blades meet, so i have to cut everything twice, the engine, a techumseh, sounds like a ol john deere and shakes like one when its running too, the tires wont hold air since new, ect, im not happy with it,
 
(quoted from post at 03:59:46 09/17/08) apparently the parts are made in china, partialy assembled, and the store finishes assembly when they get them, i bought a new craftsman last year, its typical cheap chinese junk, the mowerdeck wont stay leveled because the mounting hardware bends frequently , it also leaves a strip of grass in the middle where to 2 blades meet, so i have to cut everything twice, the engine, a techumseh, sounds like a ol john deere and shakes like one when its running too, the tires wont hold air since new, ect, im not happy with it,

That's what I thought I'd hear. I'm in Germany and have a friend that just came back from the States on vacation. The folks he was visiting had one that he was impressed with (more with the price I think). I can get one through our PX but heard they were junk.We can buy china made ones (MTD) at our equal to HD pretty cheap, just want to be able to tell him that he'd be getting the same quality for half the headache.

Thanks, Dave
 
(quoted from post at 03:59:46 09/17/08) apparently the parts are made in china, partialy assembled, and the store finishes assembly when they get them, i bought a new craftsman last year, its typical cheap chinese junk, the mowerdeck wont stay leveled because the mounting hardware bends frequently , it also leaves a strip of grass in the middle where to 2 blades meet, so i have to cut everything twice, the engine, a techumseh, sounds like a ol john deere and shakes like one when its running too, the tires wont hold air since new, ect, im not happy with it,

That's what I thought I'd hear. I'm in Germany and have a friend that just came back from the States on vacation. The folks he was visiting had one that he was impressed with (more with the price I think). I can get one through our PX but heard they were junk.We can buy china made ones (MTD) at our equal to HD pretty cheap, just want to be able to tell him that he'd be getting the same quality for half the headache.

Thanks, Dave
 
The Craftsman mowers are all MTD or AYP products...lots of chinese metal, no better or worse than anything else in that price point.
As always, look for cast front axles rather than stamped, steel blade spindles rather than aluminum, etc.
buy right as well as cheap and you won't go wrong
 
Bought a 42 inch cut,20 HP mower with a Kohler engine this spring. Salesman said it was made by Husquavarna, and it looks identical to a Huskie. Had no problems with it so far and I use it on my lawn as well as mow a cemetery with it.
 
I have two craftsman yard tractors, both have 212 hp B&S engines. The reason I have two is because here in the mountains we have some steep hills. The older machine, a 2001 wore out the brakes but I used it anyway and one day while talking to the neighbor I took it out of gear and turned it off. When leaving, I turned it on, depressed the clutch(really stupid) and proceed to fly down the hill , uncontrolled, and hit a culvert. Bad news. Bent frame, axle and wheel. Also damaged my ankle. Well, needing to mow the yard, I bought a new on and then rebuilt the old one for about 200. Now I have two. The older one was used almost every day to walk the dogs about a mile. Has many hour on it and runs fine.Best yard machine I have ever had. And tough! Henry♦
 
I have 42 in cut 19 HP V-twin ( well its a 22 Hp V-twin now) So far in just over 4 years they have replaced the front end the spindles on the mower deck the engine (lost a rod) 2 batteries a new wirer harness and miscellaneous parts at a cost to them of more than $3000. Tractor $1200 new. I keep the repair service on it because it has more than paid for itself so far.
Next time I'm looking at Cub Cadet.
 
212 H.P.! You should be able to mow mountains with that much power. LoL The only mower I ever saw that had more power than that used a jet engine. Dave
 
I have a 4year old 25 hp Craftsman with just over 100 hours on the meter. I like to refer to it as "My $2500.00 MISTAKE!!!" JUNK, JUNK, JUNK!!!!

Sorry for sugar coating it about the CRAFTSMAN JUNK, but I'm a real introvert when it comes to expressing my feelings about JUNK!!!!!!!
 
Ive been shopping lawn tractors hard the last few months and have come to the conclusion that the bulk of them no matter what name is on them are made by 2-3 companies just to different specs. Being just a touch on the cheap side (spelled poor) I kinda decided on a Craftsmen because in north florida where I'll be using it its all sand and the decks are the thickest (11ga) that Ive seen. Oh and its also the cheapest for the HP, Hydro,54" by $300 this is the one Im leaning towards.......OCG

http://www.sears.com/shc/s/p_10153_12605_07128832000P?vName=Lawn+%26+Garden&cName=Lawn+Tractors&sName=Lawn+Tractor+Series
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top