cutting pliers

bfullmer

Member
Looking for pliers to cut up old fence wire, found gear wrench compound side cutters, are these any good or are other brands better? Looking for low effort, got lot of wire to cut and hands aren't what they used to be.
 
Follow the link below, they are like mini bolt cutters and take little effort to cut fence wire.
Poke here TSC
 
I bought a pair of bolt cutters from Home Depot and they cut wire like butter. It takes very little effort to make a cut. Some of the wire was heavy reinforcement wire that is used for tomato cages I use in my garden. Hal
 
Look up Knipex tools. They are made in Germany I think. They are the only ones that last cutting high tensile wire. they are a compound cutter so are very easy to operate. They are expensive compared to the TSC or big box store brands. My opinion is that they are worth the extra $$$
 
The Mini Bolt Cutters are great for that but buy a good pair that are spring loaded. I like the Kobalts I got at Lowe's
The TSC ones look cheesy in the photos
 
You can buy Knipex side cutting pliers from you local MAC Tools distributor. That's where I got mine. They say Mac on the handles and Knipex on the head.
 
Here's what I use. They'll cut everything I've ever encountered in farm fencing - including 12 1/2 gauge high tensile. I wore out a Channel Lock pair, but it took twenty years. These are made in China, and there was no USA made pair in the store, so that's the bad. Paint them orange when you bring them home - easier to find on the job then.
Fence pliers
 
I have a pair of Knipex also. I bought them for cutting e-brake cable but work great for fencing also. Have used from dog run cable to double stand fence wire and high tensile wire.
 
(quoted from post at 09:58:08 03/08/14) Here's what I use. They'll cut everything I've ever encountered in farm fencing - including 12 1/2 gauge high tensile. I wore out a Channel Lock pair, but it took twenty years. These are made in China, and there was no USA made pair in the store, so that's the bad. Paint them orange when you bring them home - easier to find on the job then.
Fence pliers

That type have been around for at least 60 years.
 
The best method is the handheld construction chop saw.

I suppose the rechargable 4" unit with the narrow cutting wheels would works near as easily.

sounds like carpal tunnel complaints if I had to cut wire

maybe there's a rechargable unit
 
with a lot to do I would consider a cutoff wheel in a hand held grinder. Will eat through it fast. I have a Dewalt 18 volt grinder set up with one of the .045 cut off wheels and it is amazing what it will go through. Don't forget to wear safety goggles.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top