D-17 ALLIS CHALMERS

[Anonymous-0]

Can a 1957 d 17 allis chalmers hydrauilic pump handle a loader with a remote spool with the traction booter all the way in the up position to keep hydraulic power to the remote.Loader is slow but I can handle that just don't want to mess my pump up

 

[John B.]

As long as your pump isn't under constant load or dead-headed it will be fine.

I've always wanted to put an open center two way spool valve on my Farmall H so I'd have two way hydraulics. If I did I'd have to have the original lift lever in the lift position all the time so oil would be directed & flowing thru the two way valve back to the reservoir. This doesn't hurt a thing since the pump is always pumping anyway regardless if it's lifting an implement or not.

 

[acwd45man]

the traction booster has nothing to do with the remote outlet.

 

[Anonymous-0]

If you don't put the traction booster all the way up you have to raise the hydraulic lever up ,like you are raising a disc, while also using your loader control.But with the traction booster lever all the way up it runs oil through the remote.