D6C steering break problems

[Drew3306]

So when I'm in neutral on forward powershift side I have a half pedal then when I switch to reverse the pedal his the floor. I'm thinking break bracket any thoughts?

 

[Fritz Maurer]

Both sides?

 

[Drew3306]

No just the left

 

[Fritz Maurer]

Could be the lining getting loose. Never heard of the bracket loosening. If you adjust it and it gets worse your gonna have to lift the cover and see what's going on in there .

 

[Drew3306]

I adjusted it. It got a little better but still bad i was talking to some old logging mechanics about it they said they have seen the struts break and even the dowels come out. Probably have to rip her apart and see?

 

[Drew3306]

Thanks for the information btw

 

[Fritz Maurer]

If that were the case it would be jamming up or wouldn't work at all. Got a 955L that needs very judicious turning of the adjustment bolt. Can only turn 1 click, just enough to get the pedal off the firewall. Any more than that and it starts dragging.