DC FRONT WHEELS

[Hittin' Hard]

Will wheels and hubs off an adjustable front dc, fit a narrow front end.

 

[Casestuff]

No

 

[Hittin' Hard]

What kind of light weight wheels and hubs will?

 

[53DC]

The previous owner of my DC put an sc front end on mine to
lighten it up.

 

[Anonymous-0]

I have seen VAC spindles/wheels on a DC.
Nick

 

[Case Nutty 1660]

I have had these steel "DC" wheels on my "S" before for tractor pulls, a lot of the hubs were drilled and tapped for three and five bolt wheels this "DC has both so either wheel will fit

 

[Casestuff]

The adjustable wide front on a DC used SC hubs and bearings. The later ones had a hub that would accept the three bolt cast wheel for weight up front when using eagle hitch. AS far as I know they still used SC bearings. Actually the wide front axle itself was the same they changed the tire size, 15 inch on the SC and 16 inch on the DC. That does't mean somebody didn't make something up.

 

[Hittin' Hard]

Has anyone tried to bolt up a six bolt wheel to the 3 bolt hubs?