i changed the fuel filter out in the fall on the 3600. and flushed the tank out, filled up with diesel... pulled tap a couple of times. put fresh diesel and a can of BK injector cleaner. used that tank up with no problems. when I tanked up again with fresh diesel my tap got clogged after about half tank used up with a small amount of clear looking gel looking slime. rinsed tank again. put fresh diesel, halfway thru, another small slime on the tap.
that time i went to the machine shop, they recommended power service 'diesel kleen' additive. i mixed it strong the first tankfull, no problems while burning that tankfull. the next tank i only put a small amount of diesel kleen, and halfway thru... more slime. not much but enough to stop up the tap. i could run that stuff double dose all the time i guess, but the exhaust is awful strong, not to mention i'm worried about it doing more harm than good?
is something growing in there? any suggestions?
thanks
that time i went to the machine shop, they recommended power service 'diesel kleen' additive. i mixed it strong the first tankfull, no problems while burning that tankfull. the next tank i only put a small amount of diesel kleen, and halfway thru... more slime. not much but enough to stop up the tap. i could run that stuff double dose all the time i guess, but the exhaust is awful strong, not to mention i'm worried about it doing more harm than good?
is something growing in there? any suggestions?
thanks