Just put a fresh overhauled Roosa Master on my 1950T and now Ive got a problem. #1 line is leaking so bad at the banjo fitting that it wont even fire the injector. Ive tried flipping the washers, flipping the banjo fitting. Even tried a set of washers off a CAV pump I had laying around off a 372 perkins. No matter what I try it keeps blowing fuel straight up and straight down at the face of the port on the pump. Any suggestions other than CAV 5936 332C washers? Really dont want to pull the pump back off and drive an hour to take it back to the pump shop cause Im to the point where I need this tractor back up and running.