Draw bar Lock Support Bracket

8N1949

Member
I keep having to come up with a device to keep my draw bar from turning when hooked to the trailer. Is there such a "device" that someone has made to can cure this problem. Surely, some wise individual has made a product that will secure the draw bar from turning.
 
(quoted from post at 22:10:51 08/22/09) I keep having to come up with a device to keep my draw bar from turning when hooked to the trailer. Is there such a "device" that someone has made to can cure this problem. Surely, some wise individual has made a product that will secure the draw bar from turning.

More of em than you can shake a forked stick at.

Maybe I can post some pics in the AM.
 
I used a short piece of metal strap and twisted it a half turn, then drilled holes to match the draw bar hole and sway bar hole where the bolt for the adjustment is. Works for me.
 

http://i534.photobucket.com/albums/ee346/TOMNMS/IMG_0134.jpg
IMG_0134.jpg

Untitled URL Link
 
Googled for Drawbar lock and come up with this one. Looks very easy to install and remove drawbar without too much effort.


c3c0_1.jpg
 
(quoted from post at 00:27:48 08/23/09) Here's what I came up with.
a4308.jpg
F7Hooligan,
Will your brace hold down the lift too?
Can't see in your photo, how does it attach to the drawbar?
 
Old, In this instance the ball bolts thru both the drawbar and the piece that attaches to the toplink, so yes it does keep the drawbar from riding up as well as twisting. I made it out of a garden tractor hitch that came with my chipper. I just had to drill the holes out a little bigger.
 
Thanks gentlemen for all the information. I didn't know there were so many good ideas on a lock for the drawbar. I've been using a old piece of flat iron stock drilled so to attach to the drawbar similar to F7Hooligan idea.

I like Dunks link...redrockmfg brand. It looks compact, easy to put on and remove. The price seems to reflect substance of gold it's made from.
 
Imade one out of angle iron with apiece of 1/2"X3"stock on the bottom and to hook the lift pins to it is well braced at the top link,and have pulled trailers,small trees etc with no problems cost nothing,except time and afew 6011s-----lha
 
I use the ones from Ag Supply Co. Big heavy chunk of steel, and I put one on each lift arm. Work great keeping the ball hitch reasonably level.

Doug
 

I've used the top link to keep the draw bar from rotating. It also acts as a stay to keep from riding up. Just rotate the bottom portion of the link and put a pin through one of the holes in your drawbar - Always available and you don't have to buy anything.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top