Drop spreader help needed

[endrelund]

I got this at an auction the other day and blew on the seal on the hydraulic pump and I can't figure out how in the hell to get the thing off. I have looked for a manual even other ones like it and I can't find anything.
Thank you

 

[JMOR]

pump?

 

[endrelund]

pump?

Not a pump a motor my bad

 

[JMOR]

Looks like I see bolts inside next to rotor/shaft.

 

[endrelund]

Looks like I see bolts inside next to rotor/shaft.

Yea theirs 3 of them one is on the bottom and can't be reached

 

[JMOR]

Yea theirs 3 of them one is on the bottom and can't be reached

Well, they had to assemble it, so maybe a swivel or pull rotor out from opposite end first?

 

[caterpillar guy]

Id say you have to pull the shaft then you can get to the bottom bolt. Or cut a hole and then put a patch over the hole you made.

 

[endrelund]

Id say you have to pull the shaft then you can get to the bottom bolt. Or cut a hole and then put a patch over the hole you made.

Yea I'm thinking I'm gonna have to cut a hole to get it out. I think I could do it but I can't get the gear off the bottom shaft. Tried to get it off for like 4 hours with different gear pullers and it just won't move so gonna have to resort to other options. The one annoying thing with it is that it's got acrylic plastic used as bearing so I can't heat the gear up to get it off without melting that.