easy h stroker

[Anonymous-0]

I have a new set of 3 9/16 flattop pistons that would be perfect to add 1 inch of stoke to an H.
Would this be worth doing? How much work would the block require?

 

[Dblair]

well with pistons that small and no domes you'll have to stroke it . call Murphy's motor service get crank and rods no work to block with a 5 inch stroke kit.

 

[300farmall]

If you are going to go to all the work to stroke it and especially if you are having other rods made you should buy some larger pistons also.

 

[Anonymous-0]

The rods will remain stock. Just stroke the crank and remove the sleeves.

 

[farmallh.o.]

I might have a good low hour 5.125 stroke crank and clearenced rods for sale in interested. E mail open

 

[jhellemn]

(quoted from post at 18:23:08 08/30/09) I might have a good low hour 5.125 stroke crank and clearenced rods for sale in interested. E mail open

Email me how much at [email protected]