Ok, I know some of you folks know these things offhand so I'll run it by you. Have a 63 4000(4cyl) gasser. She starts up and runs fine for 45 minutes give or take a little and then stalls all of sudden and dies. It's happened last two times I've used it, about a month apart. First time I let it sit about an hour and came back and it started right up and I drove it to the shed w/o incident. Today I let it set for just 10 mins. or so and it started up, took it back to the shed w/o incident again. Didn't have the stuff to check for spark or fuel flow with me in the field. Guess I'm gonna have to take it with me next time. Does it sound like anything specific? or just gonna have to trou
ble shoot a little. btw the engine wasn't very hot when this happens, just maybe a 1/4" into the green on the gauge.
Sorry for the long post and thanks in advance for any advice.
Mark
ble shoot a little. btw the engine wasn't very hot when this happens, just maybe a 1/4" into the green on the gauge.
Sorry for the long post and thanks in advance for any advice.
Mark