epoxy primer question

[woodman1928]

Idk what i did tryed to fix spelling and some how double posted sorry

 

[woodman1928]

Oh and fyi they make a supper stiff synthetic bristel brush for angle grinder thats great for scuffing down the primer latter for paint! I like the 80 grit one supper quick

6" x 5/8"-11 Nylon Wire Cup Brush

The BHA 6 Inch Nylon Wire Cup Brush for variable speed polishers and angle grinders are made to reduce work times when sanding and prepping uneven surfaces. These 4 inch cup brushes are made with abrasive infused nylon filaments that do not spark, are heat and shed resistant. BHA 4 inch cup...

www.empireabrasives.com

 

[Mike(NEOhio)]

What brand is that? Only one I've used was in a two-part rattle can from S-W.

I found the old receipt. It was SPRAY MAX product number 3680032. Comes in four colors, this one is the beige. Available on Amazon and from Summit Racing among others. It was $20 for the can then, a little higher now. I'm thinking about getting four or five cans to do all the large castings. A lot easier than mixing. Used it on a Buda I rebuilt for my E4. One can gave me two coats on all the cast parts.

 

[showcrop]

When I was painting the chassis of a 960 Ford 25 years ago I think I picked up four cans. Then I got two more, then I think I picked up four more. Then I think I must have finished up with another two. Around fifteen years later I painted it for real. There is just not much actual paint in the rattle cans.