F-20 overdrive

[Chris NW Ind]

Picked up one of these overdrive units over the weekend. While the one pictured is not mine it is identical (I swiped the picture from this forum.) Mine appears mostly complete and in fair shape. What seems to be missing is the proper input shaft joint (which I think is more or less the same as an original but shortened to make room for the drive gear.) Also missing is the operator lever.

Does anyone have a picture of the operator lever and/or a picture of the complete unit installed and working on a tractor?

Thanks for any help, Chris B.

 

[mschwartz]

Hello Chris, I recognize that picture as being one that I posted. I have not put that one onto the tractor yet but I will look closer and see if I can get you better pictures. Have Bennett units mounted in tractor and I will get a picture of that also in the next couple of days. Mike

 

[Chris NW Ind]

Yes, that was yours. It was the clearest and only other picture I could find of a Bennett overdrive. I picked up the very same unit, minus the operators handle extension.

 

[mschwartz]

I believe the overdrive to be a SnoCo. It was posted on here years ago by someone else. I also have a couple tractors with those foot brake conversion

 

[Chris NW Ind]

That's instructive if somewhat difficult to read. Now, I just want to see the operator lever as installed on the tractor. To understand where it is routed, where it rests.

Thanks again, Chris B.

 

[ihkovas]

F20 SNOWCO Roadgear

removal and replacement

www.flickr.com

If I done this right, a post on flicker has some pictures of Snowco gearbox

 

[Chris NW Ind]

F20 SNOWCO Roadgear

removal and replacement

www.flickr.com

If I done this right, a post on flicker has some pictures of Snowco gearbox

That is very helpful. Thanks.