Farmall 300

[Followers of Weber]

Does anyone know where to get a spacer block for when you take the hydraulics off of Farmall 300?

 

[Haird7]

Exactly where are you talking about needing a spacer block?

 

[Mopower]

I have some 300 hydraulic parts but not sure what part you are describing.

 

[wls]

i belive you need a farmall H spacer I have one if you are interested

 

[Anonymous-0]

Im not sure if the H spacer for the distributor housing will fit on the 300 timing cover,,, 3 bolts will line up, but not all 4,,,, may have to swap the timing covers to make it right, if your trying to remove the hyd pump,,,,, I wouldnt ruin a good hyd pump by running it dry. ChadS

 

[Anonymous-0]

I went through this last year. If you want to take live hyd pump out you also have to replace the front plate behind timing gears with an H plate to use the spacer from an H. ChadS is right the holes will not all matchup. I chose to take the gears out of the pump. There is a thrush washer also that I removed. I put a breather in the top and put oil back in. At the bottom where the lines would have been I made a plate and used the original o-rings to seal it off. Has not leaked and works fine.