farmall h

[CJ_1080]

will a 300-350 propane head bolt directly to a farmall h? I think the blocks are the same? What about the cam? thanks everyone!

 

[east cost puller]

yes

 

[Black Farmall]

Head will bolt on, the cam in your "h" is differnt than the cam in the 300-350. a 300-350 cam will help out a little with low end torque.

Matt

 

[mark20]

will the 300-350 cam fit in a h with no mods.whats the horse power gain.

 

[Black Farmall]

Im not sure what the accual horsepower gain is on the "h" to 300 cam swap. But i do know they are ground different. If your looking for a really good working cam to match that LP head. Call Sunny @ bullet cams. Hes a great guy and does an amazing job at a reasonable price(last winter 175 for a 300 cam regrind)

Matt

 

[Anonymous-0]

Yes the lp head will bolt on and you will have some power gain and get ol Sonny to fix your cam for a little more power.If you are looking for a lp head I have some ready to bolt on for more power.615-394-8390