Farmall pullers

[Anonymous-0]

I understand there is an international truck engine that without a whole lot of modification can be put in a 560 that will bring it up around 400cid. Does anyone know what engine it is and what has to be done to get it in there.

 

[Haird7]

An RD450 and 501 will work in a 560. We are also learning about this swap so I'm sure someone with a little more knowledge will chime in. I know you have to have a flywheel made!

 

[MIKE FRENCH]

got a RD450 for sale if anyone is interested. Not stuck, was a irrigation engine, email for more info.

 

[Haird7]

How much and where at?

 

[MIKE FRENCH]

NW MO in little town called Craig, $500OBO, has homemade exhaust manifold with twin pipes(They did a nice job)

 

[Anonymous-0]

I have a RD450 for sale, $ 400 in Tenn.

 

[Anonymous-0]

The 460 and 560 IHC engines are of the BD[Black Diamond] Engine Series. They are basically Truck Engines modified for Tractor use.I don't know if they share Bell Housing Flange Patterns with an RD[Red Diamond ] Engine Series or not but it should not be too hard to determine using the BD to RD Specifications if you can find them. The BD 308 was a common class 7 Truck Engine. I had one in an A 180 Single Axle Truck Tractor. The BD 308 was used for other applications also. IHC had an SD [Silver Diamond} Engine Series also but they were used in light Trucks.

 

[Anonymous-0]

Tenn is your engine lose tenn and mike were the engines runing on nat gas

 

[Haird7]

What kind of shape is the motor in and what part of Tenn. are you located?

 

[MIKE FRENCH]

Mine was on gasoline only, would take an offer on mine if any one is interested, thanks

 

[Super 77 puller]

I have a rd 501 i would sell, dont know anything about it, theres no manifolds but the head and block are there i think it turns over. $250