Farmall super C toolbox

[Dustin Hartmann]

How many bolts are there in a super c tool box to take out so i can remove the toolbox i can only see 2 Does any one know of anymore

 

[riverbend]

Parts book shows (4) 1/2-20 NF nuts associated with the toolbox / seat support and (2) hex hd 1/4-20 NC X 3/4" cap screw associated with the hose guard. It is too dark and too cold to go out and look.

Greg

 

[Dustin Hartmann]

Thanks thats what i needed to know

 

[Keith-OR]

Dustin, there are 4 bolts that hold the tool box on the platform. All 4 are inside the tool box, 2 towards the front and 2 in the back (towards the rear of tractor). HTH


Keith & Shawn(Special Olympic Champion)

 

[Keith-OR]

Dustin, there are 4 bolts that hold the tool box on the platform. All 4 are inside the tool box, 2 towards the front and 2 in the back (towards the rear of tractor). HTH


Keith & Shawn(Special Olympic Champion)