Feed Grinder

[Dave8N in Pa]

I need a gear-box for Geile 95. I'm not sure I spelled that right. Anybody know where to start looking for it?

 

[rustyfarmall]

Most likely Gehl bought that gear box from another manufacturer, and it is likely that the same gear box was used on Farmhand, Arts-Way, John deere, etc., etc. See if you can find some part numbers on the gear box and go from there.

 

[rrlund]

Geez,I don't know about that. I've had a Gehl 55 and 65,a Deere 700 and now a New Holland 354. The two Gehls were the same,but the Deere and New Holland weren't even close.

 

[chuck41]

Hi Dave, Are you sure it can't be rebuilt? Over
the years never saw one that couldn't be. And yes
a 95 gearcase would be different even from a 65.
Thought I had a parts book and manual left but I
guess they are gone. Best to you. Chuck

 

[m breckon]

You might try looking for a manhinery salvage yord. THERE IS A LAGRE ONE IN CLINTON MISSOURI , COOKS SALVAGE

 

[rrlund]

The one on my New Holland went up just before Christmas. I got it off and all that was wrong was the two bearings on one shaft. None of the gears were hurt and neither was the shaft. A pair of bearings and cups and a seal,I was back in business.

 

[tomstractorsandtoys]

You are in PA so try Fry's machinery at (570)-546-3968 they have a huge implement salvage yard.But as others said check yours first because it can probably be rebuilt.

 

[Tim(nj)]

If the one you have is not rebuildable . . . you need to find a salvage unit as they are NLA. Fry's is a good place to start.

 

[Dave8N in Pa]

Thanks Tim, I tried Fry's and they don't have any.

 

[Dave8N in Pa]

Thanks Tom, I only live about 30 miles from Fry's but they don't have one. The one I need to replace is broken and it had been welded up by P/O and is really a mess.

 

[Dave8N in Pa]

Thanks Chuck, but this one is broken and the bearings burnt out. Machine shop would be very costly to make it right. Rather get another one.

 

[Dave8N in Pa]

Thanks Rusty, I'll try that.

 

[Dave8N in Pa]

Thank you sir, I'll try to look them up.

 

[Dave8N in Pa]

Thank you sir, but this one broken and burnt bad. It's a real mess.

 

[ss55]

What would a replacement mill cost compared to the labor and parts to fix the old one? If other Gehl 95's are available in your area you could get another and save your old one for parts, otherwise scrape it for around $300 or more (1.5 tons?).

 

[Anonymous-0]

junk it ,,gehl /Vermeer makes the poorest engineered junk to farm with ,don't matter if you arecuttin / raking /baling, or grindin /it is very disgustin to operate their stuff if the conditions are less than perfect ,. I am speaking from miserable experience with used worn out products ,,,buy , artsway , farmhand , new Holland ,, and b e happy

 

[Bud Sather in MT]

I have the 120 model. I was surprised at all of the parts that was available from my dealer. Bud

 

[Tim(nj)]

I have a 120 as well. The gearbox is NLA as of last year.

 

[Tim(nj)]

A mill worth $500 in the Midwest is worth $2500+ in the northeast . . . so it's harder to replace.

 

[JRSutton]

aint that the truth!