fighting cabin fever

Anonymous-0

Well-known Member
Morning Andy!
I was plowing snow with the B last night after work. So I got a little tractor time in!
Stay warm!
Mark Miller (Shaggym)
 
Andy,
I have ben wrenching on snowmobiles an atv's for customers .....when I get them all done I will be working on some pulling parts finishing up my wheelie bars and fully adjustable hitch. plus I may be building a light weight wide front for a customer as well....;) next winter I hope to be machining some parts as well.....keep your self busy or you will go nuts believe me we have long winters here......I say about 3 months are spring and summer rust is fall and winter.....lol

Kelly
 
I plow snow with my 140 so....got something to do.
Besides that, a little wrenching on our C to get it ready for pulling.
 
Work in the shop, complete re-do on the puller, different front end, tires, cylinder head and paint. Mostly done but still setting on the stands. Re-doing an old 89 chev pickup, all susp. and mech., cab corners etc, building a flat bed on it, my new farm truck, the old 87 is just plain used up. -20 with a wind today and I got the crud so just pitching wood in the furnace and take it easy. I got the propane furnace on in the shop and set on 40 and that stack is steaming almost steady, but I don't like it to get below freezing in there.If we don't have an early Spring it's going to be a long winter, I like em less every year, stay warm and a great 2014 to all!!
 
I'm not doing very good, at staying in. Chopped ice for the horses this morning. Walking against the wind coming back to the house was really cold! Heater on in the shop but it is just 30 deg in there. to cold to work, at least for me. After I get done with this I'm going to go to the fertilizer co. and listen and tell stories, maybe some will be true. Then go to town to restraunt and do the same again! Didn't snow enough here to plow. Wind blew most of it up to Ohio.
 
Monday morning, got 16 inches and lots of wind, the drifts were 4-5 foot high.

Plowed for about an hour then had to have some fun.

c142653_lrg.jpg


c142654_lrg.jpg
 
Kept busy in mid Michigan building a new mid wt bracket on my M as long as I kept wood in the woodstove it was 60 in shop and -14 outside. I tried to bust thru 2-3 ft drifts on my 1400 ft drive but gave up on that till the wind quits
a141041.jpg
 

Andy, you need to get that old trailer house warmed up and get to work on tractors. I stay as busy in the winter as summer. One project after another to work through the shop. I hope I can get through them before I run out of winter.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top