Fitting Lights to Case VA

[Ron Haling]

I have restored a Case VA Serial No. 5164160 which is a 1947 model
This model takes the Headlights on a Stem rod which I have obtained from USA supplier
Can somebody tell me where and how these should be fitted on this tractor PLUS where do you fit the rear light
Thanks
Ron

 

[Anonymous-0]

my vac has the stem rod mounted to the clutch side floor board ,rising above the board perhaps a foot , the brake side has a simple bolt on under the floor board ,, the rearlite is mounted to the seat asssembly ,, i would ground the lite,,

 

[AJB-830]

Ron, Here are a couple of pictures showing the stem lights on my 1946 VAC Case. I assume they are the same on a 1947. My dad bought this tractor in about 1948, so I am sure the lights came this way from the factory. The rear light is mounted on the seat but I don't have a picture. Send me an email and I can take a picture of the rear lamp too. Al

 

[WeirdDeere]

A couple not so great pictures of the brackets

<a href="http://s108.photobucket.com/albums/n8/weirddeere/?action=view&amp;current=VAC_FrontLight.jpg" target="_blank">

</a>

<a href="http://s108.photobucket.com/albums/n8/weirddeere/?action=view&amp;current=VAC_RearLight.jpg" target="_blank">

</a>

I have the tractor in pieces right now. If you want a picture of the brackets, I can take one

Brandon