Harbor FreightMy floor jack is leaking pretty bad so it's time to start shopping for a new one. Have a 3/4 ton pickup truck so it will need to be a 3 or 4 ton model. Any suggestions? Thanks
It's a Lincoln 2 ton service jack. I called a place that rebuilds hydraulic stuff and they didn't want to mess with it. Where would a person get seals for it? ThanksProbably an easy fix. Just new seals. I've fixed dozens of them that were thrown out.![]()
I found a kit for my Blackhawk listed on ebay. I didn't purchase it as taking it all apart looks like a pain and it's my spare jack that's over 50 years old.It's a Lincoln 2 ton service jack. I called a place that rebuilds hydraulic stuff and they didn't want to mess with it. Where would a person get seals for it? Thanks
A web search for Lincoln Jack Parts will bring up many possible vendors you can check with. You can try this place for one.It's a Lincoln 2 ton service jack. I called a place that rebuilds hydraulic stuff and they didn't want to mess with it. Where would a person get seals for it? Thanks
Lazzar hcrcnow.com 562-596-5477It's a Lincoln 2 ton service jack. I called a place that rebuilds hydraulic stuff and they didn't want to mess with it. Where would a person get seals for it? Thanks
Go to Ebay and search for something like Lincoln jack sealsIt's a Lincoln 2 ton service jack. I called a place that rebuilds hydraulic stuff and they didn't want to mess with it. Where would a person get seals for it? Thanks
Same with my Harbor Freight Daytona. It screeches like crazy under load. Maybe they're made by the same manufacturer.Not sure who makes it for them, but I'm happy with the 10 ton I got from NAPA.
My only critique would be the noise the cylinder makes when under a heavy load. It screeches like a pterodactyl in an old Hanna-Barbara cartoon.
Mike
I have 4 purchased at HF, 2 regular length and 2 extended length. Have had them for at least 10 years. All 3 ton, no problems with any of them. I have 4 for certain tasks around the farm.My floor jack is leaking pretty bad so it's time to start shopping for a new one. Have a 3/4 ton pickup truck so it will need to be a 3 or 4 ton model. Any suggestions? Thanks
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy