foam filling

Anonymous-0

Well-known Member
Please, someone, educate me. If filling my old trailor plow tires with "foam" will eliminate flats and bypass problems with rusted wheels that are still reasonably strong, why don't we all fill all of them with the foam. I really don't care much about the weight ..and I will never need to change them and if i do I could just cut them off and replace them?!
 
I suppose you don't want foam on something you ride, even a lawn mower, because air will absorb more shock, it rides smoother. On a plow it shouldn't make any difference, as the older ones were steel.
 
On some vehicles foam filled tires will cause the rims to crack around the lug nuts over time because the tire no longer absorbs any shock incurred. It will also add quite a bit of weight to your plow and cost more than the plow is worth probably. But that's up to you! I would take the chances on flat tires my self but my situation may be different than yours.
 
I put foam in my batwing mower tires about 10yrs. ago so far so good, don't ride any rougher than airplane tires.
 
(quoted from post at 12:58:43 09/03/09) Please, someone, educate me. If filling my old trailor plow tires with "foam" will eliminate flats and bypass problems with rusted wheels that are still reasonably strong, why don't we all fill all of them with the foam. I really don't care much about the weight ..and I will never need to change them and if i do I could just cut them off and replace them?!

At least one of the deck wheels on my mower was flat every week so I had them foam filled. It cost $10 each and it solved my problem. They should have came from the factory like that.
JD1600Full.jpg
 
in the forklift business, we are careful what we foam fill. The tradeoff is you lose some traction, lose some ride, add weight, and they have caused some rims to crack from the valve stem cutout in the rim to the lugs. I've seen them break the entire center out of a 36,000 pound forklift with heavy duty rims.

We also NEVER foam fill anything larger than a 14.00 x 20. Tractor profile tires would be too heavy for axle ends and bearings if filled.

Also remember, foam filling works ONLY on low speed tires.
 
Why don't we all do it? You ask?

It's too expensive is my reason, an inner tube is a lot cheaper and if checked periodically it will stay up for years. But most people don't even check the air in their truck or car tires until they look low or someone tells them.

Another reason is that foam filled tires develope flat spots when sitting for an extended period of time even over a weekend.

When is the last time any one checked the air in their spare tire in the trunk of their car or under their truck. I always check mine when I change the engine oil. While the oil is draining I grease the fittings and check the air in the spare and all the other tires.

Foam filling we always considered was for problem tires that were hard to change on certian equipment or that were in a department where tire killers existed.

My dad had a snapper lawn mower years ago and it would always pop the front steer tires loose from the bead so he had them foam filled and it worked great on that application. In 1978 the cost to have the 4" tires foam filled were $28.00 each.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top