Finally gathered all the fittings, hose and gauge, chained the lift arms down as instructed, removed the plug, screwed in my gauge. Started the tractor, raised the lift and the gauge jumped up to 2000.
What started this is my lift will not lift a load all the way up. I am going to rebuild the lift cover over the winter but wanted to eliminate the possibility of a bad pump. Believe the spec is 2500 and wondering if I should be very concerned about the 500 PSI difference?
What started this is my lift will not lift a load all the way up. I am going to rebuild the lift cover over the winter but wanted to eliminate the possibility of a bad pump. Believe the spec is 2500 and wondering if I should be very concerned about the 500 PSI difference?