Ford 3550 diesel engine

Frank In MO

New User
I need some help IDing a diesel engine in a Ford 3550.

The model code (K5024K) shows that the tractor was originally a 3550 w/gas engine. The tractor now has a 3 cyl. diesel.

The identification plate under hood shows 2K26B as engine code.

I found the following numbers:

On the left side just above oil pan FONN6015
This number has Ford Oval above and is followed by the number 88 after long space.

Also on left side above oil filter HG2 3L05

Any help is greatly appreciated.

Frank
 
Additional numbers I found on right side above dipstick.

1C442317* RA

6505

numbers on lower right not legible.

Thanks for any help.

FB
 
Get the engine serial number off the pan rail on the right side. If it's a 4000 series engine I believe it will be prefixed with a 'C'. A 3000 would be 'B'. Anyhow, that's just from memory. Get the number and I'll check in in a service manual.

Rod
 
Rod,

Thanks a bunch for your reply. I will go look again, but, the only numbers I found on the right were near the pan rail near dipstick.

The 1C442317* RA
6505 not legible

I was looking through the archived messages and found a couple that would lead me to believe that this block was made in the 90s(The F0nn casting casting number). Would the year made make a difference?

Frank
 
I think that would be the number. 'C' would suggest a 4000 series engine, so it should be a 201. It's likely a BSD replacement given those casting numbers. I'm not positive about that, but it's not big deal anyway. If you ever do get into the engine just about all you need to know can be verified by measuring the bore and stroke to confirm this.

Rod
 
For engine numbers, no.
He would appear to have a newer engine than was originally fitted to the tractor. I believe he's got a 10 seires engine or even a 30 series engine and by that time the Engine serial number was prefixed with a little different scheme. From what I've observed (but not 100% sure of) a 2x10 engine would be 'A'; 3x10 is 'B'; 4x10 is 'C'; 5x10 is 'D'; 6x10 is 'E'; 7x10 is 'F' and the 401's probably go 'G', 'H' and probably 'J' for the N/A, Turbo and intercooled versions respectively.
Again, I'm refering to the engine serial number stamped on the oil pan rail, not the tractor's serial number.
The thousand series tractors had the same style of engine serial number prefixes but they used different letters.

Rod
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top