freeze plug

Anonymous-0

Well-known Member
My dad has a 1960 Mod. 600-601 ford tractor. Is there a freeze plug located at the rear of the block at about the 12 O:clock position. Any information is appreciated. Thanks

Roger
 
Ford hasn't changed a bit. Had to replace the soft plug on the back of the head in #1 son's F-150 with the 300-6 engine. After a lot of head scritchin', I bored a hole in the firewall with a hole saw and replaced the plug. Was a lot quicker and easier than pulling than engine.
Does this help you? I didn't think so.
 
At onetime there were neophrene freeze plugs available that you could tighten with a wrench in hard to get places. They may still be available. Antifreeze will lose its rust inhibitor and then start to work on the metal. I change the antifreeze after 2 years use. It will
cause the heater core on a truck or car to leak.
I have a 1981 Mercury Cougar and its a major job to replace the heater core in it. Need to pull the dash to gain access. Hal
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top