All freon has the potential when heated to turn into a deadly gas (called Phosgene) it is a neurotoxin. If the tank has been vented for days with the valve removed, no issue. I would drill a 3/4inch hole in it to prevent possible bursting from fuel gas (acetylene) getting in. A sawzall with a metal blade (or abrasive wheel is cleaner. JimN
 
Freon & flame make phosgene gas. It is poison!!!!!!!!!!!!!!!!!!! If I remember right it was used in World War II as a poison. But yes you can cut a old freon tank. Just make sure that it is empty & maybe pull the valve out & take your air hose off of your compressor & blow some air in there to purge the tank. Gerald
 
venting for days will not get all the freon out, when he heats the metal with the torch it will release freon and make phosgene.
 
Hello moonlite37,
What kind of freon?
Most freons, as stated by others, will create mustard gas when heated.
You can try and fill the tank with water first, and let it sit in the sun.
After that,i would think would be safe to cut it up after letting the water out.
Guido.
 
Hard to take anyone seriously who won't publish their name; there's such a thing as reputation or bona fides.......
 
And to think, the first freon leak detector that IH authorized was a propane torch with a hose attached that would draw air into the flame. When the flame turned yellow you were making mustard gas and you had found the leak. They did include warnings to only use it outside and not to breathe the vapors.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top