Froze bolt problem

[Fsteiner]

Need advice on removing blade bolts on 54 in deck on John Deere 425. Bolts are froze and I don't want to round off the bolt heads. Thanks

 

[El Toro]

Use your air impact wrench and a six point socket. Make sure you're turning the bolt CCW to loosen it. Hal

 

[cp7]

I agree, I always use an impact.
Also be aware that it's a metric bolt.

"Made in America with globally sourced components."

 

[Anonymous-0]

I would do as the guy below said. If the threads are sticking through top clean and put some lub on them before take out.When replacing them I use anti-seize compound on threads.Easy to get out the next time they need replacing.

 

[Anonymous-0]

Penetrating oil, and tighten them a little, before you loosen them. Don't know why, but it works, most of the time.

 

[Fsteiner]

Thanks for the info. fs

 

[Anonymous-0]

Try a product called PB Blaster spray bolts or nuts and let it soak.

 

[Cas]

If you have access to a good impact wrench, it would be the easiest way.

 

[Anonymous-0]

Had the same problem on my 420 JD. I used a torch to heat the center of the bolt head and let it cool. Came right out. It appears that someone had used some form of loc-tite and the heat realeased it.