G carb.?

[Scott's B haven]

I'm helping a friend with his G it was running good until today when he started it up and it would not stay running with out the choke half pulled. I thought a good cleaning would help.
So he brought the carb to me, I took it apart
and used my #40 and #53 drills to clean all the little passages, but the carb looked real clean.
My ? is these drills are for my B's what size do I need for a G? Do you think dirt is the problem or a settng in the carb wrong?
Any help with is greatly appreciated.
Thanks, Scott

 

[JDJACK]

Did you pull the nozzle out and clean it?

 

[Rusty Junk TX]

Make sure the points and condensor in the magnito or distributor are in good working order. They can make you think that you have a carburator problem.
Marcus

 

[Pappy]

Are you assuming that the carburetor is clogged?
What about fuel flow from the tank-through the sediment bowl-through the line-through the filter and into the carb?? I would check this out for sure.

 

[Scott's B haven]

fuel is coming in good, and nozzle is clean.No rust to speak of.

 

[Mike M]

I had a model 60 give the owner fits like that ,turned out to be a bad condenser. It sure acted like a bad carb.

 

[Mike M]

On those G carbs. there is an extra hole in the stem to let more fuel in besides the one the load needle screws into. Look closely at the bottom accros from where a brass plug is.