G-V1 flywheel

[moline UB]

Am putting an '800' cu incher in a G-V1. Is there a flywheel known to man to fit this?

 

[Philip moline]

You need a gvi diesel flywheel it will bolt
Right on unless your 800 is a later circle
Seal motor. Good luck

 

[rusty molines]

I have one but freight might be costly I am in tx.

 

[moline UB]

It is a later circle seal motor.

 

[rusty molines]

You will need a machine shop to turn down the 800 flywheel and make a bushing for the piolt bearing plus space out the clutch ringear.

 

[Chuck Wooten]

Put in a steel SFI flywheel several shops on the links page of pulloff Darren Roush is a good builder might consider going All. If you are going to pull it do it now it will save you and me money in the long haul.
Untitled URL Link

 

[Ehren]

I just had a steel SFI flywheel made by Rursch. Price and delivery time were great, and it fit perfectly. If that isn't what you want, I still have the cast one that I used the last 2 years. Just drop me an email if interested.

 

[Charles E. McNelly]

Tore into the motor yet?

 

[MMfan]

He's got it tore down, should be ready for glen rose.

 

[Charles E. McNelly]

That's good news, I plan on showing up on Saturday to watch the big boys play.

 

[rusty molines]

Philip moline what part of the country are you from? Do yall have alot of hd800 motors around there?