GM small block came out when?

JDemaris

Well-known Member
I was a life-long General Motors fan until it became external_link Motor Works International. I guess now my 65 Chevelle SS is a Michelle SS.

Anyway, my point in regard to the Small Block Chevy. To my knowledge, it came out in 1955 as the 265. Then the 283,327,305,307,302,350,262, 400,etc. I remember when it was a big deal to change a 265 into a 283 for some power. Even my 54 Vette only had a six.

I've been digitalizing some old farm magazine ads and just came across this 1951 General Motors ad. Look at the picture. Isn't that a Small-Block OHV V-8? Did they already have it in sub-production or prototype stage four years before it came out?

<a href="http://s104.photobucket.com/albums/m162/jdemaris/?action=view&current=GeneralMotorstestingadsm.jpg" target="_blank">
GeneralMotorstestingadsm.jpg" border="0" alt="Photobucket
</a>
 
It came out in the '55 model, but that model was introduced in '54, and you can bet that Chevrolet was doing testing on it LONG before that. Probably even had that small block V8 installed in a few executive cars as early as maybe '50?
 
The engine looks like an Olds. They introduced a 303 cu in OHV in 1949. Not sure when the first Cad or Buick introduced an OHV.

Chuck
 
I heard that Toyota is going to be building some new cars for Chevy.
One name they are going to bring back is the Chevette.
Only now they're going to call them the Toylette.
 
The shape and bolt pattern of the bell housing look more BOP than Chevy, but not exactly BOP either. Could be a Caddy.
 
Could be. Didn't have the Internet back then, and I wasn't reading Detroit newspapers then either. In fact, I was just a little kid at that time and didn't read anything. But, you'd think if they had the 265 up and runnnig in 1951, they'd been anxious to get it jammed into a Corvette as fast as possible. My 54 Vette had the hottest engine option availabe at the time it was made - the Blue Flame Six.

Maybe they were just more careful back in those days and didn't release something until they felt confident it would work? Unlike years later like the Chevy Vega aluminum-bore engine, built like a cheap lawn-mower?

My father-in-law is a retired Detroit Ford engineer. He gets newspapers often, desribing all kinds of stuff in the planning stages. Back in the 50s though, I don't know.
 
I would suspect they were testing them back then,my 51 buick has a straight eight.for some reason the engine on the stand reminds me of a olds but i cant say why.i'd guess a rocket 88 olds myself,but i'm guessing
 
Correct on Chev 265 V8 intro in Fall 1954 as 1955 option in Chev.

Engine on stand in picture appears to be an Olds V8 which did come out in 1949 as did Cadillac OHV V8....both looked very similiar but valve covers on Olds had the stamping ribs running from intake toward exhaust like this picture seems to show.
 
Yes, I went and looked in my 1949 Motors Auto repair manual and is shows the Olds and Caddy V8s. You and/or Allan et. al. may be correct.

I think my mind has a built-in prejudice. Whenever I see an old General Motors ad, my mind shifts to either Chevrolet, or Detroit Diesel - and I tend to forget all else.

When I was a kid, tearing apart cars, just about all were Chevy. Probably because they were cheap (as were Fords). The "high performance" option that we always wanted though, was the Cadillac-Lasalle transmission when we could find them.

I did have two eight cylinder, 1949 Pontiacs, but they were straight 8s, not V.
 
One must remember that Chevrolet had a V8 engine WAY back in about 1917 or 1919. Short lived. Yea, I know this is not the small block you are talking about and Chevrolet was not really a part of "GM" at the time.
Also, (while I'm on my soap box) when Chevrolet came out with their small block V8 in 1955, they had trouble getting the old cast iron piston rings to seat properly. Do you know the official factory fix for this? Drum roll please.......
Bon-Ami.
Yep, the kitchen/bathroom cleaner was poured down the carburetor and it scuffed up the cylinder walls enough to get the piston rings to seat. Chevy had enough of a problem with this in '55 and '56 that by '57 the engine had a little bit of a reputation as an oil burner. So much so that in 1957, Ford actually outsold Chevrolet. The '55 and '56 small blocks from Chevys are actually worth some money to the people who really want one because.....they don't have a cannister or spin-on oil filter mount.
Okay, I'm off my soap box now. Y'all can wake up now.
 
Government has no business "taking over" any stock holder owned business, they can't manage what money they have of mine!! Sorry, Your pres ticks me off more everyday. I can't tell if that was an artists representation, but some things don't quite fit with that being a small block chevy; valve cover & hold down bolts, manifolds, water inlet, lack of oil filter( I have grandfathers 55 Bel Aire 4 door original/w canister)
 
We were still using Bon Ami in our diesel shop 20-30 years ago - for problem engines with hard rings that didn't want to seat.

Did it really work? I can't say for sure. It was basically a remedy the "old timers" swore by, and we younger guys "swore at." They be revving up the diesel engines, inside the shop, full-bore, and dumping Bom Ami down the air-intake - with no hoses to route the exhaust outside. Got pretty foggy inside. OSHA would of had a fit if they'd ever seen it.
 
I think you are getting tripped up by the chevy orange paint job.

Question, weren't the OHV caddys of the day painted blue?

Rick
 
That air cleaner looks just like the one on my first car - 1950 Chevy Delux. It was the 216 cui 6 cyl. If you think about it; just tooling up to make a completely new engine would take a year or more. And that is before computers.
 
1955 Chevy 265 V/8 engines did not have an oil filter unless it was an add on bypass filter. The 1956 engines were still 265 cu in, painted red, and had the full flow canister oil filter. I had a 56 with only two options, an ash tray and the V/8 engine. I loved that car; I could outrun the 57 Ford 312's with my speedometer reading 107 mph. The Ford's would be reading up to 130 mph.
 
I think it's the engine color and shape of the air cleaner that reminded me of my first 265 I had in a 55 pickup. Who knows? I checked through some of my old books and the Olds Rocket 303 does look the closest, and the Caddy pretty close also.

My first Chevy 265 ran when I got it. But, . . . I went out and bought a "rebuild kit" from Sears. They use to sell kits in two versions - for "worn" and "very worn" engines. I bought the "very worn" kit. Came with undersize bearings and .003 oversize rings. Of course, I just bolted everything in with no machine work or measuring. Engine never ran again. That was the first of many that I ruined. What you call "trial and lots of error."

It's amazing how much time I can waste on such things. Well, no worse than fixing an old tractor, I guess.

I did eventually learn how to do things right, just took me 10-15 years to get going in the right direction.

<a href="http://s104.photobucket.com/albums/m162/jdemaris/?action=view&current=three.jpg" target="_blank">
three.jpg" border="0" alt="Photobucket
</a>
 
My dad and his buddy Don Kitterman both graduated high school in 1948, and both families were car dealers. Don drove a new Pontiac straight 8, while Dad drove a new Hudson Commodore 8 coupe...with Drive-Master on that 3-speed with overdrive.
 
I'd think that engine is a Pontiac that they put in the GMC pickups and larger trucks. Anyone remember the X8 engine, I believe Ford put it in the model "A", the bottom 4 cylinders didn't hit to good on rainy days.
 
Looks like a Old with stater on the right. HHHmmmm
55Chev V8 had hyd lifters with auto trans and solid lifters with stick. Is that correct??? I remember the V8 automatics but not any sticks. I know I never heard a 55 Chevy that sounded like a solid lifter 59 corvette. Anybody remember??Thanks
 
I had a 55 chevy with a 6, and installed a 265 V8. The first V 8's were a good running engine, but not fast enough.So I bought a 64 ford and installed a 312 and sold the 55 chevy big mistake. The Ford: Fix Or Repair Daily. Stan
 
I know that the Flint V8 plant started production in 1954, and finally quit in 1999. GM never put in a new line, so the equipment was still the 1954 stuff. Guess they got their money outta that line!! That would put it as a 55 model year product. 3 or 4 years prior would be normal curve for engine development. That kind of work is going overseas now, we cost too much.
 
(quoted from post at 13:20:47 04/01/09) The 1956 engines were still 265 cu in, painted red, and had the full flow canister oil filter..

If I'm not mistaken, many 57's had 265's, too. I BELIEVE that most 283's in 57 were the higher horsepower "power pack" (4 bbl) engines. I believe most/ all 2bbl "lower end" engines were 265.

My first car was a 4 door 57 210, 265 2 bbl

If someone had told me then, that POWERGLIDES would be used today in very high horsepower drag cars, I'd'ha told 'em they were nuts
 
I think its just an artists rendering of a combo of things at the time.The olds plug wires passed under covers sorta like the hemi of Chrysler but the picture shows them draping sloppily over the motor.Alo there is no distinct separation to any real looking bellhousing.Just advertising art and not any real motor.
 
An engine in a test cell is not going to have a production wiring harness, it is a test "mule".
 
Olds and Caddie got ohv v8s in 1949, after much development time. It was a speed demon. In 1953, the small block chevy was prepared for the pentagon as a high speed disposable motor. It showed up in sept 54 in the 55 cars with/wo an oil filter as a 265. Hyd lifters- except in the high perf editions. the small block was an excellent motor in all cases, very durable. Pontiac/Buick came out with their own ohv v8s, and some were used in GMC trucks sucessfully for a short time. All these GM motors were good.
In some cases, the valve seats and piston rings were not good enuf for trucks. The 55 corvette was able to defeat cars at 6 times the price.
The Ford Y block was also very sucessful.
 
My dad had a '55 stub nose truck with a 265 in it. It had a full flow oil filter on it. Do you suppose that truck engines had the filter and car engines did not in 1955?
 
Ok I did some googling.That could be the exact air cleaner for Olds and the color orange red was mentioned on another site.Also saw 51 for sale with gold engine and valve covers that had different ribs than this.More horizontal ribs with embossed lettering.Oil pan and sorta poorly painted valve covers look Olds.It is a nice old picture.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top