half way there

troyr

Member
finally able to post a picture of my 39 Allis B. We are just about to asemble it all back together, more pictures to come! thanks for all the help, without this forum I wouldn't have gotten this far.
i5268.jpg
[/img]
 
looks bright is that regular tractor paint or did u add hardner or clear ?
just woundering as when i paint i use hardner in mine & its shineier & seems to hold up longer but it looks good so far & dont forget to post us the finishing pics
 
Looks nice and I will look forward to more pictures.

A word of caution! If you do not have tape over where the oil filter housing bolts to the engine on where the magneto seals, you will need to remove the paint in those areas. The gasket will not seal on the paint and will seep oil.
 
Your right.Matter of fact I got oil leaking out at that very spot this very minute.I have the gas tank and toolbox on now.I had made a gasket for that oil filter holder and I made a good one for that matter,I was going to make a thicker gasket,But now I think I'm going to take a razorblade and scrape off the paint.I'm also having trouble remembering how the Gov/throttle linkage goes back together.Thanks Troy.
v4987.jpg
 
One style Left side:
rmthrottlelinkageconnection001-vi.jpg


Another style left side:
rmthrottlelinkageconnection002-vi.jpg


Not sure I have a better picture of the right side. I will look some more.

BulidingAllisEngines004-vi.jpg
 
Very, very nice. Even if its not green. A good job is a good job regardless of the color. When you get finished, be sure to post a before pic and an after pic.
 
To stop the oil leak at the filter adapter, I dress the mating surface flat with a wide file or surface plate. The surface becomes warped from overtightening. A thick gasket worsens the warpage... Gene
 
I love the tractor, I have owned a nice 38 WC. I also lost a principal of a highschool where I taught in ohio from using concrete blocks for holding weight. If what I see under the front is a solid block, you are probably OK if it has holes, do me a favor and spend 20 minutes changing to cribbing or a stand. I know it seems paranoid, but it is life and limb and they were not ment to take weight in that position. JimN
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top