have engine need tractor

[Anonymous-0]

I have a greaner engine that has 80 hp. what would be the best tractor to look for to install into. wc unstyled, wc styled, wd, wd45.

 

[Mike Bock]

wd 45

 

[Anonymous-0]

styled wc,probably cheaper to buy and lighter

 

[Mopower]

I"ve got a WC styled with 16.9x28. It"s very VERY straight, runs good, but growling bearing on one side. $800. Selling for a friend who moved out west. I"m in Michigan.

 

[LWD]

look for a wc that has a ford truck ring and pinon--6.4 to 1 and you will bepulling 6500 class in second gear...I know and that was with 18.4 by 26

 

[Pa Puller]

I have a Wc with Pressed steel rear end $675 or a regular styled wc $775 loacted in pittsburgh both are complete. Also have a Wd rolling chassis no engine.

 

[Kip-Utah]

My choice would be a WC, either Styled or Unstyled with the Styled bellhousing, so you can use a starter. Kip

 

[Anonymous-0]

What model Ford truck ring and pinon did you use and what modifications are requird. Thanks, need to slow my WC down. H.B.

 

[Anonymous-0]

I am curious what gleaner engine had 80hp?

 

[wi50]

WD45 for the simple reason that you can have a little better gear selection sometimes. A WC is fast and you likely will alwayse be in 1st with decent sized rubber. A WD 45 you may use 2nd sometimes, but it's a more expensive tractor and weighs more.