Kind of orange color, no markings on it. Broke a spindle, no one local can help me. If I can get make and model, I can start there. Solid heavy angle iron frame. Will try and add some pictures. Thanks for any help.
Just take your old pcs to a machine shop and have them make one up or better still if you have a buddy with a lathe? Probably just made from 1018 but 1045 might be safer? That looks like a relatively easy piece to make.Kind of orange color, no markings on it. Broke a spindle, no one local can help me. If I can get make and model, I can start there. Solid heavy angle iron frame. Will try and add some pictures. Thanks for any help.
Yeah, thinking I may have to, kind of worried about the cross hole bolt, getting drilled perfect.Just take your old pcs to a machine shop and have them make one up or better still if you have a buddy with a lathe? Probably just made from 1018 but 1045 might be safer? That looks like a relatively easy piece to make.
Where are you located?Yeah, thinking I may have to, kind of worried about the cross hole bolt, getting drilled perfect.
WOW are you a big help! I actually dropped it in a hole that caved in from an old oilfield pipeline. Now David form Kansas, just go away! I have a local machine shop building one today. This IH disc was still made in 1988, thought it should have parts available for it. Thanks for all that had info for me. ( No not you David from Kansas )I tend to be a skeptical person. Was this all brought on by someone who purchased a product by a certain manufacturer because he could buy it a couple of hundred dollars less than brand X? Look at the size and design of the hubs and wheels. Really small hubs with 4 bolt wheels. And then add thousands of pounds of extra weight and wonder why the bearings/hubs fail.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy